CM-T10-PROE
Wireless Control for Color Maker Series LED Fixtures Now with ColorRoll TM
CM-T10-PROE control wand is our most powerful hand held transmitter with numerous programmable features. Compatible with our Color Maker line of wireless LED fixtures and receivers. CM-T10-PROE features our new ColorRoll technology and numerous other features usually found in larger consoles.

Features:

* 10 fixture cue buttons with Up / Down RGB controls.

* ALL Edit button allow user to edit all fixture simultaneously, fixtures do not require identical address settings.

* 10 Recordable Scenes which can be played back with fade control.

* 3 ColorRoll prompt buttons which can be programmed to create custom ColorRolls with adjustable roll times. This feature does not require continuous transmitter signal.

* Digital readout to display LED color levels from 0 to 100 %
Cut Sheet Manual
ColorRoll Technology
CM-T10-PROE features our new ColorRoll technology. ColorRoll is a programmable feature which allows the user to program up to 10 colors, each color can be a combination 1 % to 100 % of red, green and blue. These color settings are sent to the fixture for processing, and after the 100 microsecond download the transmitter can be turned off since this feature does not require continuous signal to operate. The 10 colors then fade from the first color to the last with flicker free transition the process then repeats until the fixture receives a stop or a blackout code. The Roll time can be adjusted on-the-fly from 3 second roll to 5 minute roll. Fade can also be turned off on-the-fly so the colors flash through all programmed colors for a disco affect.

Scene Control
The CM-T10-PROE provides the user with 10 programmable scene buttons. Scenes are set up by adjusting all 10 fixtures RGB levels and then can be save to one of the 10 scene buttons. To play back a desired scene press the Play button followed by scene button and the programmed scene will fade to selected scene. This allows the user to change an entire rooms look without the flicker usually found with plug and play systems. The user can also select fade time from Hi to Low or turn off fade for instant color change. The user can set a scene then edit any one of the 10 fixtures to make last minute changes. The transmitter always knows what each one of the fixtures RGB levels are so the digital readout can give you updates on each fixtures RGB levels.
Fixture Selection
The CM-T10-PROE has been designed to be user friendly. Each of the 10 fixtures is selected by pressing one of the 10 fixture buttons marked Q1 through Q10. After a fixture has been selected then the user has a choice of changing the color by pressing the Red, Green and Blue fader buttons or sending a ColorRoll Pattern. The user can also has a choice to select all 10 fixtures for editing by pressing Shift + Q10.
Protective Rubber Boot

The CM-T10-PROE can be purchased with a protective rubber boot. The boot is removable and is made of durable rubber to protect the CM-T10-PROE from physical damage.

Boot will slide off the CM-T10-PRO to change 9 volt battery. Battery door is located in back side of transmitter. For best result use commercial grade alkaline batteries.